What is the inverted state of a transistor?
Categories：Product knowledge Date：2025-02-25 Hits：272 View »
Substances can be classified into conductors, semiconductors, and insulators based on their conductivity.
Categories：Product knowledge Date：2025-02-24 Hits：279 View »
Bidirectional trigger diodes were developed simultaneously with bidirectional thyristors and are commonly used to trigger them.
Categories：Product knowledge Date：2025-02-24 Hits：296 View »
Gate Turn Off Thyristor (GTO), also known as Gate Turn Off Thyristor, can be turned off. Its main feature is that the thyristor can automatically turn off when a negative trigger signal is applied to the gate.
Categories：Product knowledge Date：2025-02-24 Hits：291 View »
There are many types of diodes, which can be divided into germanium diodes (Ge tubes) and silicon diodes (Si tubes) according to the semiconductor materials used. According to their different uses, they can be divided into detection diodes, rectifier diodes, voltage regulator diodes, switching diodes, isolation diodes, Schottky diodes, light-emitting diodes, silicon power switch diodes, rotating diodes, etc. According to the chip structure, it can be divided into point contact diodes, surface co
Categories：Product knowledge Date：2025-02-21 Hits：324 View »
There are several types of diodes classified according to their applications
Categories：Product knowledge Date：2025-02-21 Hits：313 View »
There are several types of diodes classified according to their characteristics
Categories：Product knowledge Date：2025-02-21 Hits：305 View »
The "freewheeling diode" we usually refer to is named after its role as a freewheeling in circuits, and fast recovery diodes or Schottky diodes are generally chosen as "freewheeling diodes".
Categories：Product knowledge Date：2025-02-20 Hits：294 View »
The relationship between the absorption power (peak value) of transient voltage and the pulse width of transient voltage. The manual only provides the absorption power (peak value) at a specific pulse width, while the pulse width in actual circuits can vary unpredictably and needs to be estimated in advance. The wide pulse should be downgraded for use.
Categories：Product knowledge Date：2025-02-20 Hits：264 View »
As is well known, the voltage regulator diode must be connected in series with a current limiting resistor during use, otherwise it will be burned out. The maximum operating current of a voltage regulator diode (the maximum operating current refers to the maximum current allowed to pass through the voltage regulator tube during operation) is limited by the maximum dissipated power of the voltage regulator tube (the power at which the heat emitted from the tube will damage the tube when the curre
Categories：Product knowledge Date：2025-02-20 Hits：302 View »
